AQUA SEALER KH02

AQUA SEALER is a high-performance water-based sealer that is designed to protect the finish against chalking and efflorescence. AQUA SEALER will tolerate slightly damp large-scale project surfaces.

• Coverage: 10 – 12 m2/L @ 30 microns.
• Volume Solids: 30 microns.
• Dry Film Thickness: 25 microns/coat.
• Wet Film Thickness: 75 microns/coat.
• Flash Point: Not applicable.

APPLICATION

• Drying Time: Surface dry: 15 minutes; Recoat: 1-2 hours.
• Dilution: Clean household water.
• Cleaning Up: Clean household water.

DILUTION RATIO

• Brush or Roller: Ready for use. If dilution is required, add up to 5% clean water.
• Conventional Spray: Dilution of up to 10% water.
• Airless Spray: Ready for use.

FINISHING

• Color: Off White.
• Finish: Smooth matt finish.
• Pack Size: 5 & 18 liters.

New, unpainted surfaces & repainting: Exterior

New, unpainted surfaces & repainting: Interior

Limitations:

• Not suitable for use on newly plastered walls that are not fully cured. AQUA SEALER works best on surfaces with a moisture content of below 15% and alkalinity below pH-9 or otherwise premature paint failure may occur.
• Can tolerate slightly damp surfaces but not wet and water saturated surfaces.
• AQUA SEALER is not a waterproofing coating. If waterproofing is required, seek specialist advice

• Ensure adequate lighting and ventilation during application and drying.
• This product does not contain added lead or mercury.
• When applying paints, it is advisable to wear eye protection.
• In case of contact with eyes, rinse immediately with plenty of water and seek medical assistance.
• Use soap and water to remove splashes from skin.
• Storage: Keep container closed and store in clean, dry conditions.
• Do not empty into drains or water courses.
• This product is not flammable. Keep out of reach of children.
• Safety Data Sheet (SDS) is available upon request.