AQUA SHIELD 1K KH15

AQUA SHIELD 1K is a special color waterproof paint, which has a deep penetration and will not cause peeling for many years, absolute water resistance, long lasting color. Effectively used for concrete or sand cement surfaces in positions such as vertical walls. The durability of the product has been confirmed through many years of experiments, giving good quality.

• Components: Acrylic, pigments, additives & water
• Color: Refer to catalogue and fan-deck
• Finish: Matt
• Theoretical coverage: 9.8 -13.0 m2 /liter/coat
• Volatile Organic: Compound (VOCs) ≤ 50 g/L
• The drying time, Relative Humidity (RH) 50%

SURFACE PREPARATION

New surface:

• Let the concrete, cement plaster and mortar must be cured at least 28 days in ambient condition (average temperature is 25°C -30°C, relative humidity <75%), the surface moisture is not exceed 16% (specialized measuring testing equipment). pH value is about 6-9.
• Remove all dust, grease, wax, laitance, chalking and others contamination from the surface by specialized machine as: grinding, sanding, vacuum cleaner, high pressure water jet and proper cleanness

Old surface:

• Remove all dust, fungus, algae, loose old paint or others contamination from the surface by specialized machine as: grinding, sanding, vacuum cleaner, high pressure water jet and proper cleanness.
• Then, treat the areas attacked by fungus, algae with proper chemicals. Wash the surface if required, let it fully dry, the substrate moisture must be lower than 16% (specialized measuring testing equipment).
• Repair the damaged area. Cracks bigger than 0.1mm must be fixed and make smooth.
• Apply 1 coat of proper alkali sealer to improve adhesion for paint film.

APPLICATION METHOD

• Application tools: Brush, roller, conventional spray
• Film thickness: Guiding data for airless spray
  • Nozzle tip size: 0.021 – 0.027”
  • Spray angle degrees: 65 – 80º
  • Pressure at nozzle: 140 – 190 Kg/cm2 (2.000 2.600 Psi)
  • Dry film thickness: Min: 30μm, Standard: 35μm, Max: 40μm
  • Wet film thickness: Min: 77μm, Standard: 90μm, Max: 103μm
  • Film thickness will vary and is calculated as average
• Dilution: The paint is ready to use after proper stirring until homogeneous. If thinning is required, clean water may be added up to a maximum of 5%.

• Store in a dry, cool, good ventilation area, shaded area. Keep out of reach of children. Storage temperature is about 25°C – 35°C.
• Ensure that the right primer is used. Should use putty and let it thoroughly cure before painting.
• Stir well before use and once opened, entire contents should be used.
• Apply when temperature is from 10°C to 35°C and relative humidity <75%. The surface temperature must be 3°C higher than the dew point.

• Please do not handle until all safety precautions have been read and understood.
• Keep away from heat, sparks, open flame, and hot surfaces. No smoking.
• Wear protective gloves, respirators, eye protection, and protective clothing.
• Avoid contact with skin, eyes, or ingestion. Go right to the nearest health center for help in case of ingesting paint or paint contacts with your eyes.
• Avoid release to the environment. Treat discarded paint according to environmental law.
• See more guidelines in the Safety Data Sheet.